Rip Fence; Connecting The Sawdust Extraction Device; Use; Switching On And Off - Parkside PHKSA 20-Li A2 Manual Del Usuario

Rip fence

♦ Undo the wing screw
fence into the rip fence slot
♦ Set the desired cut width with the help of the
scale on the rip fence
base plate (see also fig. B).
The right recess in the base plate is for a cutting
angle of 0°. The left-hand recess in the base
plate is for a cutting angle of 45°.
ATTENTION!
♦ Adjust the rip fence
come into contact with the blade guard
the saw blade !
Fig. B: Cutting width 3 cm
♦ Retighten the wing screw
Connecting the sawdust extraction
device
♦ Attach the adapter for dust extraction
chip ejector .
Optional, depending on the diameter of the
dust and sawdust extraction.
♦ Connect an approved dust and chip extraction
device.
NOTE
► When sawing wood or other materials that
create dusts that are hazardous to health,
always connect the appliance to a suitable,
certified suction appliance.
PHKSA 20-Li A2
and insert the rip
.
and the cut out in the
so that it can never
or
.
to the

Use

Switching on and off
Switching on
♦ Push the safety lock-out
and keep it pressed.
♦ Press the ON/OFF switch
running, you can release the safety lock-out
Switching off
♦ Release the ON/OFF switch

Setting the cutting angle

You can select the cutting angle using the cutting
angle scale .
■ Undo the wing screw of the cutting angle pre-
selector , set the desired cutting angle on the
cutting angle scale
wing screw .

Setting the cutting depth

NOTE
► Select a cutting depth of approx. 3 mm more
than the thickness of the material. This ensures
that you achieve a clean cut.
♦ Undo the locking screw
cutting depth on the cutting depth scale
then retighten the locking screw

Working with the circular saw

1. Switch on the appliance – as described in
"Switching on and off" – and then place it with
the front edge of the base plate
material.
2. Align the machine using the rip fence
using a marked line.
3. Hold the machine in both hands using the
handles and saw by exerting an even pressure.
to the left or right
. Once the saw is
.
and then retighten the
, set the desired
and
.
on the
or by
GB │ IE │ 11
.
■