Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble-shooting
In the event of a fault, you
should in principle contact
Truma Service (see page 22).
Before calling Customer
Service, please check the
following:
1. Is the 230 V mobile home
supply properly connected,
and are the fuses and
protective switch in good
order?
2. Are the fluff filter on the
unit and the air intake to the
stowage box in which the
device is installed free?
3. Do the cold air pipes fit
exactly into the cold air
connections of the unit?
4. Are the air intake openings
in the floor of the vehicle free
from dirt, leaves and the like?
Function diagram
Supply air
infeed from
Compressor
the outside
Condenser
Fan
Supply air
Throttle
discharge to the
outside-downwards
High-pressure side
6
Accessories
Noise suppressor for instal-
lation in the cold air pipe for
additional noise reduction
within the living compart-
ment (Part no. 40040-60100).
Blow-out channel for additi-
onal noise reduction outside
the living compartment.
Installed beneath the vehicle
(Part no. 40040-32500).
The flexible air conditioning
intake allows the Frostair
air conditioning unit to be
installed in a space that is
sealed off from the interior
(e.g. false floor or rear sto-
rage space) and prevents
contaminated air from being
drawn in (e.g. petrol fumes
from the rear storage space).
Part no. 40090-59100
Cold air
outlet
Circulating
air suc-
tion intake
from inside
Low-pressure side
Technical data
determined in accordance
with EN 814 or Truma test
conditions
Designation:
Saphir comfort BT
Comfort air conditioner
Area of operation: Small
areas, mobile and stationary
Number of installation
units: 1
Dimensions (LxWxH):
710 x 400 x 285 mm
Weight: Approx. 24 kg
Power supply:
230 V - 240 V ~ 50 Hz
Maximum cooling capacity:
2.4 kW
Actual power
consumption:
0.98 kW
Start-up current:
20 A (150 ms)
Current consumption: 4.2 A
Protection mode: IP X5
Energy Efficiency Rate
(EER): 2.4
Volume flow (cold air):
max. 380 m³/h
Cooling agent:
R 407C
Cooling agent content:
See name plate on unit
Compressor oil:
Diamond MA32, 300 cm³
Noise:
Depending on installation
situation
Maximum inclination of
vehicle during operation:
5° / 8%
Operational limits:
+ 16°C to + 40°C
– Below + 16°C an ambient
air sensor prevents the ope-
ration of the compressor.
– An icing sensor prevents
impermissible formation of
ice on the evaporator.
– A temperature switch pre-
vents excess current flow
and excess temperature at
the compressor.
EEC Type Approval:
The Saphir comfort BT com-
plies with the vehicle engine
interference suppression di-
rective 72/245/EEC with sup-
plement 95/54/EC and bears
the type approval number:
e1 024392.
Right to effect technical
modifications is reserved!
Publicidad
