Eurotec G4SF9 Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 29

After cleaning the oven from the inside and the outside, carry out the following steps:
- Rub all the surfaces with a cloth soaked in some white mineral oil.
- Regularly air the room where the oven stands.
- Strew the door gasket with talcum powder.
STAINLESS STEEL PARTS
- Clean the stainless steel parts every day with warm soapy water, then rinse thoroughly and dry carefully.
- You can keep it shining brightly by periodically wiping it over with liquid detergent, an easily available product.
- You must never clean the stainless steel with steel wool, wire brushes or common steel scrapers since
they may deposit ferrous particles that on oxidizing cause rust points. Stainless steel wool may be used applied in the
direction of the satin finish.
- If the unit is not to be used for a long time, give all the steel surfaces a good wipe over with a cloth lightly soaked in Vaseline
oil in order to apply a protective film. Periodically ventilate the premises.
All manuals and user guides at all-guides.com
- 29 -
GB