Stalgast 801350 Instrucciones De Uso página 32

6.3. Manual elements
1. Control panel
2. Button functions
Fig. 8 Fig. 9
On/Off
3. Start-up of the device
Turn on the switch located on the wall, open the dishwasher door, place the overfl ow plug in the appropriate place (fi g.
8) and close the door of the device. Press the On/Off button (fi g. 9). After the tank and the boiler are fi lled with water
the boiler heating element lamp will light up (bottom, fi g. 12). After the heating of water in the boiler is completed, the
dishwasher chamber water heating cycle will begin – the chamber heating element lamp will light up (top, fi g. 12). Insert the
basket into the device chamber and wait until the indicator light of the chamber heating element turns off. Before starting
the wash cycle, it is necessary to select the program. Program 2 (120 s.) is the default program. After pressing the program
selection button we will switch to Program 3 (180 s.), which will be signaled by a fl ashing lamp (fi g. 11), In order to start the
wash cycle, press the button (fi g. 10). After starting the wash cycle, the indicator lamp will light up. If the door is opened
during the wash cycle, the program stops automatically. After the door is closed, the program continues the wash cycle.
After the program is completed, the wash cycle indicator lamp turns off, and the boiler heating element lamp lights up.
Remove the basket from the device chamber.
4. Emptying of the tank in models equipped with a drain pump
Open the door of the device, remove the overfl ow plug and close the door, turn the device off by pressing the On/Off switch
(fi g. 9). The draining process proceeds automatically until the tank is completely emptied of water. In order to reactivate the
device, put the overfl ow plug back in its place, close the door and press the On/Off switch. However, if the device will not be
used any more, turn the main switch off.
In the event the device will no longer be used, after the completion of the above and the possible initiation of a
regeneration cycle, it is necessary to turn the device off by pressing the switch. The main switch should then be turned off
and the water valve should be closed.
5. Emptying of the tank in models not equipped with a drain pump
Turn the device off by pressing the switch (fi g. 9), then open the door of the device, remove the overfl ow plug (fi g. 8) and
wait until the water is drained off completely from the tank. Put the overfl ow plug back in its place, close the door of the
device.
Fig. 10 Fig. 11
Wash cycle Program selection
- 32 -
Fig. 12
Lamp indicating
hamber heating element
operation
Lamp indicating boiler
heating element operation