ROHO DRY FLOATATION Manual De Operación página 9

All manuals and user guides at all-guides.com
ADJUSTMENT INSTRUCTIONS, Continued
3: Slide the pump's rubber nozzle over the
valve and inflate until the product arches
slightly upward.
5: For mattress overlays only: Reapply bed linens (maximum one sheet, one draw sheet, or one
incontinent pad). Place the individual on the mattress overlay in their normal lying position.
Linens not shown.
6: For mattress overlays and O.R. Pad: To adjust for the proper immersion level of each
product section, slide your hand between the product surface and the individual's lowest bony
prominence. Turn the valve counter-clockwise to open, and release air until the area of high
risk is within the suggested Inflation Guidelines (see the next page). Turn the valve clockwise
to close. Repeat Step 6 for the remaining product sections.
NOTE: The adjustment sequence noted in the image is ROHO's recommendation; the
sequence for adjusting the product may vary for each individual.
NOTE: Confirm proper adjustment after transferring the individual back onto the product.
4: Turn the valve clockwise to close.
Remove the pump. Repeat steps 2 and 3 for
remaining sections.
9