Stabilizing Bar For The Back; Siderest In The Frame Colour, Height Adjustable, Foldable - Küschal ULTRA-LIGHT Manual Del Usuario

Ultra-Light

3.6 Stabilizing bar for the back

An optional stabilizing bar is available to increase the rigidity of
the backrest on wheelchairs with large back heights or widths.
IMPORTANT!
– Do not use the stabilizing bar to lift or push the
wheelchair. It could break.
– Release the stabilizing bar before folding the
wheelchair.
Releasing the stabilizing bar
1. Push the spring pin A on the fastening on the left-hand side
and swivel the stabilizing bar downwards.
The stabilizing bar can also be completely removed, by pushing
the spring pins on both sides. The stabilizing bar can then be
taken off.
16
3.7 Siderest in the frame colour, height
adjustable, foldable
Folding
1. Grip the siderest by the cushion or by the front curve and
fold it back.
Removing
1. Fold the siderest back and pull it up out of the holder on
the back.
Fitting
1. Insert the siderest from above into the holder on the back.
2. Fold it downwards.
Adjusting the height
1. Tip the lever A on the front of the support and move the
armrest upwards or downwards until you reach the desired
height.
2. Engage the lever.
3. Perform the setting on both sides.
1583566-C