5. Tilt the wheelchair until the rear wheel on the opposite side
rises off the floor.
Prior to removing the rear wheels, the distance between
the lowered transit wheels and the floor should not be
more than 2 cm.
6. Remove the rear wheel,
® 7.3 Removing and fitting the rear wheels, page 37.
7.
Repeat the process on the other side.
Switching from transit wheels to rear wheels
1.
Move the wheelchair to a stable object, which you can use
for support and hold onto it firmly with one hand.
2. Tilt the wheelchair until the transit wheel on the opposite
side rises slightly off the floor.
3. Fit the rear wheel back onto the removable axle,
® 7.3 Removing and fitting the rear wheels, page 37.
4. Bring the transit wheels back into the inactive position.
5. Repeat the process on the other side.
1583566-C
4.7 Luggage carrier
Your wheelchair can be fitted with a luggage carrier. When not in
use, the luggage carrier can be folded up.
WARNING!
Risk of tipping
Weight on the carrier changes the tipping
behaviour of the wheelchair. The wheelchair can
tip forwards more easily when the luggage carrier
is loaded.
– Use the luggage carrier only for transporting
small and lightweight luggage.
– Avoid driving the wheelchair to fast when
carrying luggage.
– Avoid driving ramps and slopes when carrying
luggage.
– Do not stand on the luggage carrier.
Accessories
25