2.2 Safety devices
WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, antitipper) can cause accidents.
– Always check that the safety devices are working
before you use the wheelchair and have them
checked regularly by the specialist dealer.
The functions of the safety devices are described in chapter 3
Components and their functions, page 11 .
2.3 Labels and symbols on the product
Identification label
The identification label is attached to the frame of your
wheelchair and gives the following information:
Küschall
A G
Benkenstrasse 260
A
4108 Witterswil
SWIT ZERLAN D
B
KÜS CHALL Ultra-Light 2009 S
C D
2016-06-27
E
130 kg
012345 67890
F
G
Active wheelchair , tipping possible !
Manufacturer's address
A
B
Product description
1583566-C
www .kuschall.com
B 440 mm
Read User Manual
Made in Switzerland
C
Date of manufacture
Instruction to read the User Manual
D
E
Maximum user weight
F
Serial number
G
Warning that this is an active wheelchair and can tip
Snap hook symbol
Tie-down positions where the restraint system
straps must be placed in case of transporting the
occupied wheelchair in a motor vehicle, refer to 7.4
Transporting the occupied wheelchair in a vehicle,
page 38.
These symbols are only attached to the wheelchair
when it is ordered with the transportation kit
option.
WARNING Symbol
This wheelchair is not configured for passenger
transport in a motor vehicle.
Antitipper warning label
WARNING: Read user manual
Follow user manual instructions prior to the
usage of an antitipper device.
Safety
9