Tires; Seat Cushion - Küschal ULTRA-LIGHT Manual Del Usuario

Deactivating the antitipper
1. Push the antitipper completely downwards and swivel it
forwards until it engages.
Setting the height
1. Press the spring pin A on the antitipper and push the outer
section to the position required. Allow the spring pin to
engage in the nearest hole.
If further adjustments of height and/or position are
necessary, refer to your specialized dealer.

3.13 Tires

The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from the
list below, check the side of the tire, the maximum pressure is
often listed there.
Tire
Profile tire 7 bar
Schwalbe® Marathon 10 bar
Plus
Schwalbe® One 10 bar
Schwalbe® Rightrun 10 bar
-
Solid tire, profile, grey
-
Solid tire (KIK type),
black
-
Solid, light wheel
1583566-C
Max. pressure
700 kPa 101 psi
1000 kPa 145 psi
1000 kPa 145 psi
145 psi
1000 kPa
- -
- -
- -
The compatibility of the tires listed above depends on the
configuration and/or model of your wheelchair.
In case of a tire puncture consult a suitable workshop
(e.g. bike repair shop, bicycle dealer ...) to have the tube
replaced by a skilled person.
The size of the tire is mentioned on the sidewall of the
tire. The change of appropriate tires must be carried out
by a qualified technician/dealer.
CAUTION!
– The tires pressure needs to be equal in both
wheels to avoid decreased driving comfort, to
keep the parking brakes working properly and to
ease propelling of the wheelchair.

3.14 Seat cushion

A suitable cushion is needed to provide an even pressure
distribution on the seat.
Use a seat cushion with anti-slip underlay or Velcro®
(hook) fastening tapes to avoid slipping of the seat
cushion. A Velcro® (loop) fastening tape is pre-attached
to the seat cover.
Components and their functions
21