Num'axes CANICOM 1000 Manual De Instrucciones página 19

- Deactivate: approach the area where the On/Off switch magnet is located inside the remote control
until coming in contact on white indicator located on the receiver collar, hold for 1 second (ref.
Diagram 5), the indicator light will flash from green to red and then off: the collar is off.
To increase the battery life of the receiver collar, we recommend you deactivate the unit if you are no longer
using your CANICOM 1000 for a long period.
Diagram 5
Activate/Deactivate a receiver
collar with a CANICOM 1000
remote control
 ◆ Coding of the remote control and receiver collar
Each remote control has its own individual radio operator code. The coding of the remote control with the
receiver collar enables the two units to work together. You can add a 2
IMPORTANT: before beginning the coding, make sure no other person is using his CANICOM 1000
or other products from the NUM'AXES range close by: your receiver collar could accidentally
record the code of his remote control. If that occurs, re-code the remote control with the receiver
collar.
CODING PROCEDURE
1. Warning: If you have two collars, you have to code them one at a time.
Activate the remote control: press for 1 second the On/Off red button (
remote control.
2. Select the collar you want to code on the remote control. Press the 1 or 2 key in order to select the
collar (the number 1 or 2 will appear on the LCD screen).
All manuals and user guides at all-guides.com
Gb - 19
Approach until coming in
contact those 2 areas
during 1 second
COLLAR
REMOTE CONTROL
collar at any time.
nd
( (
) located on the side of the