Safety Signs; Personal Protective Equipment (Ppi); Residual Risks; Areas Assumed By Authorised Operators - Senco AC33024 Instrucciones De Empleo

13
12
4

14. SAFETY SIGNS

Safety signs used take the formof a sticky label, applied to the
appliance exterior.
Sign definitions:
Warning – electrical power.
1
Warning – automatic start-up.
2
Warning – high temperature.
3
Instructions must be read.
4
Power must be disconnected.
5
6 Protect your hearing.
Guaranteed sound power level.
7
1
2
4
5
THE SAFETY SIGN MUST BE KEPT CLEAN SO THAT IT IS
VISIBLE.
SAFETY SIGNS WHICH ARE DAMAGED MUST BE REPLACED;
ASK FOR A REPLACAMENT FROM THE MANUFACTRER OR
THE AUTHORISED SUPPLIER.
REMOVING AND/OR DAMAGING THE SAFETY SIGN AT-
TACHED TO THE APPLIANCE IS STRICTLY FORBIDDEN.

15. PERSONAL PROTECTIVE EQUIPMENT (PPI)

PERSONAL PROTECTIVE EQUIPMENT ISSUED BY THE
MANUFACTURER MUST BE USED.
AUTHORISED OPERATORS MUST WEAR PERSONAL
PROTECTIVE EQUIPMENT ISSUED BY THE MANUFACTURERS
OF THE UTENSILS EMPLOYED BASED UPON THE WORK TO BE
CARRIED OUT.
8
6
7
3
6 7
AUTHORISED OPERATORS MUST NOT WEAR CLOTHING
AND/OR ACCESSORIES THATMAY BECOME CAUGHT IN THE
APPLIANCE.
SIGN COMPULSORY
Hand protection
(heat-resistant
gloves)
17
Ear protectors
(earmuffs)
Feet protection
(shoes with rein-
forced toe caps)

16. RESIDUAL RISKS

Although the Manufacturer has adopted all technical construc-
tion solutions in order to make the appliance as safe as possible,
authorised operators please be aware that residual risks remain.
RESIDUAL RISK
SEVERITY OF
DAMAGE
LIABILITY
PROBABILITY
PHASE IN
WHICH THE RISK
IS PRESENT
SUITABLE
PROVISIONS

17. AREAS ASSUMED BY AUTHORISED OPERATORS

AREA A: on the rear side of the appliance next to the command
devices , in order to command the activation and deactivation
of the compressor, to carry out connection/disconnection of
the utensils, reading of the gauge and the regulation of the
pressure, cleaning or replacement of the air filter and opening/
closure of the condensate pump.
AREA B: when working to carry out suitable operation depend-
ent on the type of utensil used (E.g. veneering, etc.).
7
TYPE OF WORK
PPE
In the instance where mainte-
nance interventions have to be
carried out whilst the electric
motor and the twin cylinder
pump system are still hot.
During all operational
phases.
During appliance transpor-
tation.
Danger of burns upon accidental con-
tact with the twin cylinder pump system
and the electric motor.
Mild damage (normally reversible).
Liability may be incorporated in the
instance when the operator decides
to voluntarily carry out an incorrect or
forbidden action.
Small and accidental.
Operation.
Safety signs (see Paragraph 14).
Commitment to use personal protection
equipment (PPI) (see Paragraph 15) and/
or waiting for the appliance to cool.
EN