Safety Instructions; General; Installation; Overflow Guard Function - grandimpianti GH6 Instrucciones De Funcionamiento

www.groupdynamics-laundry.com
sales@groupdynamics.lv

Safety instructions

General

• Read the operating instructions and keep them
in a safe place.
• Installation of water and electricity, if required,
should be carried out by a qualified
professional.
• The machine should only be used for washing
items as described in these instructions. It is
not intended for dry cleaning.
• Use only detergent intended for machine
washing!
• Remove any transport protection devices
before using the machine. See the "Transport
protection" chapter.
• Repairs and maintenance relating to safety or
performance must be carried out by a qualified
professional.
• Damaged mains cables must only be replaced
by a qualified electrician.
• The machine is not designed to be used by
persons (even children) that are physically or
mentally handicapped or lack experience and
knowledge. Such persons must receive
instruction in how to use the machine from the
person responsible for their safety.
• Children must be watched to ensure they do
not play with the machine.
• In the enclosed plastic bag you will find a tool
for opening the washer door in emergencies.

Installation

See the "Installation" chapter.

Overflow guard function

If the machine's water level rises above the normal
level, the overflow guard function begins to pump
water out and shuts off the water intake. If the
water level has not dropped within 60 seconds,
the program is terminated.
4

Transport/Winter storage

If the machine is to be transported or stored in
unheated premises where the temperature can
fall below freezing, do as follows:
• Empty the filter and the drainage pump. See
the "Care and cleaning" chapter.
• Shut off the water to the washing machine,
loosen the supply hose to the intake valve and
let the water run out from the valve and hose.
• After emptying the pump, a small amount of
water may remain in the machine. This does
not affect quality or damage the machine.

Recycling

This machine is manufactured and labelled for
recycling. In order to prevent injuries, the machine
must be made unusable once the decision has
been taken to dispose of it. Contact your local
authority for information about where and how
your machine can be recycled correctly.