Installation Menu; Programming; Reset - Rancilio CLASSE 10 Manual Para El Técnico

4. INSTALLATION mENU
When the coffee machine is switched on for the first time, the following installation menu is displayed in se-
quence:
- Language selection
- Pressure unit
- Temperature unit
- Softner unit
- Date mode
- Clock mode
- Clock setting
- Pressure setting
- Cleaning reminder
If no changes are required, press "esc", in order to continue with installation.

5. PrOGrAmmING

Programming is carried out on two levels, namely:
"Bartender" programming
"Technician" programming
5.1. Programming Panel
This panel features 4 buttons with the following
functions:
- Button with "+" sign
to scroll through the menu items or to increase the
sizes.
- Button with "-" sign
to scroll through the menu items or to increase the
sizes.
- Button with "enter" sign
To enter the programming menu. Or to confirm
entries
- Button with "esc" sign
To quit the menu or to quit programming mode.
When the "+" and " – "buttons are pressed for appro-
ximately 2 seconds, the "bartender" programming
menu is activated. This menu contains the following
submenus:
To move from one submenu to another, press "+" or
"-". To enter in a submenu, press "enter", while to
quit, press "esc".
When a submenu is accessed, the editable value is
displayed and changes can be made to it by pressing
on the "+" or "-" keys.
If you make changes, these must be confirmed by
pressing "enter" until you quit the submenu. If you do
not wish to save your changes, press "esc".
6
All manuals and user guides at all-guides.com
SELEZIONE
LINGUA
LANGUAGE
SELECTION

RESET

RIGENER.
RESINE
REGENERAT
BUZZER ON RESET
OROLOGIO
BUZZER
SET TIMER
CLOCK
CONTATORI
PARZIALI
SET TIMER
RINNOVO
ACQUA
CALDAIA
SELECTIONS
COUNTER
RENEW
WATER BOILER