- Manually lay the wheel onto the turntable
(8) and lower the lifter by operating on pedal
29.
- When positioning the wheel on the turntable,
also take care to centre the movable centring
pin, placed radially on the turntable, in one
of the fixing bolt holes.
29
- E
- Operator's manual
nglIsh
31
14a
14a
2 • Clamping the wheel to the turntable
(fig. 15)
- Choose the correct cone for the hole of the
rim.
- Press the clamping pedal 31.
- Put the clamping device in the drop centre of
the wheel (Fig 15).
- Make sure the cone and the rim are perfectly
centred.
- Release the pedal 31.
3 • Tyre deflation (fig. 16)
- Operate the valve and fully deflate the
tyre.
4 • Bead breaker positioning (fig. 17-17a)
- Move the bead breaking unit from the its rest
to its operating position
- Move the disc towards the rim:
- the horizontal movement is achieved by
hand, rotating the console
- the vertical movement is achieved by
operating control 21
15
16
59