Mondolfo Ferro AQUILA RAPTOR Manual De Uso página 61

5 • Upper bead breaking (fig. 18)
- Preload the bead breaker disc using control
21 (a tyre crushing preload of about 5 mm is
advisable).
- Activate disc penetration (control 25) and
then start wheel spinning (pedal control 15),
while lowering the bead breaker disc a little
at a time (control 21).
- Perform at least one complete spin to fully
break the bead. The rim bead should be greased
during the spin.
- Set the upper arm upwards over the wheel
with (control 21)
- E - Operator's manual
nglIsh
6 • Lower bead breaking (fig. 19)
- Preload the bead breaker disc using control
23 (a tyre crushing preload of about 5 mm is
advisable).
- Activate disc penetration (control 26) and
then start wheel spinning (pedal control 15),
while lowering the bead breaker disc a little
at a time (control 23).
- Perform at least one complete spin to fully
break the bead. The rim bead should be greased
during the spin.
- Set the upper arm downwards below the wheel
with (control 23)
18
A
B
C
19
61