Approved M/Dprocedure For Uhp And Run Flat Tyres; Extraordinary" Mounting Procedure - Mondolfo Ferro AQUILA RAPTOR Manual De Uso

11 • Tyre unloading (fig. 31)
- Lower the wheel lifter (pedal 29) and position
the wheel on it by hand (A).
- Lower the lifter (pedal 29) (B).
- Remove the wheel from the lifter.
68
PROCEDURE FOR UHP AND
For the detailed M/D procedure for UHP and
RUN FLAT tyres, please refer to the instruction
manual wrote by WDK (German Association of
the Tyre Industry)
"EXTRAORDINARY"
MOUNTING PROCEDURE
- A variation of the mounting procedure explai-
ned above may be adopted in case of rims
with very small or non-existent drop centre
(fig.11-B). In these exceptional cases, the
mounting procedure can be facilitated by
using a variant of the normal procedure.
- The first bead is mounted in the usual way. To
mount the second bead, position the movable
tool as when approaching for demounting (fig.
29 32).
- This reduces the stresses, leaving more space
for the tyre. The following operations, illu-
31
strated from fig. 28 on, remain unchanged.
APPROVED M/D
RUN FLAT TYRES
- E - Operator's manual
nglIsh
32