Mondolfo Ferro AQUILA RAPTOR Manual De Uso página 63

- E - Operator's manual
nglIsh
9 • Upper bead demounting (fig. 22)
A
- Check that the tool has engaged with the tyre
- Operate (control 28) to get the machine ready
- Make sure that the tyre has not beaded in on
- Only then operate pedal (15) until the bead
- Here again, it might be helpful to use the bead
- Upon demounting, if the tyre tends to slip on
B
C
10 • Lower bead demounting (fig. 23)(Using
tool-carrying head)
- Place the tool on the edge of the rim (A).
- Push the bead breaker disc against the bottom
- Using control 28, operate the hook and engage
- Operate pedal 15 to rotate the wheel until
21
bead.
for the subsequent demounting operation
(performed with the wheel at a standstill and
not rotating).
the operator's side. If necessary, use a clamp
and/or a bed presser.
is completely demounted.
breaker disc on the lower part of the tyre.
the rim edge, the HELP accessory supplied can
be used (see "PRACTICAL HINTS, ADVICE AND
USEFUL INFORMATION").
bead (B) using control 23.
the bottom bead of the tyre (C-D).
the tyre is completely demounted from the
rim (E).
22
63