Power Panel - ETQ PG30P11 Manual De Usuario

ETQ
EASTERN TOOLS & EQUIPMENT INC

Power Panel

(1) (2)
NO. ITEM
(1) Engine Switch
(2) Low Oil Sensor
(3) 120V 20A Duplex(GFCI→5-20R)
(4)
120V 20A Duplex(L5-30R)
(5)
VOLTMETER
(6)
AC CIRCUIT BREAKER
(7)
LUG GROUND
Tel: (888)696-2345
(3)
Flip the switch to the "On" position and pull the recoil starter to start the
generator. Turn to the "Off" position to turn off the generator.
Senses low oil condition and flashes; prevents engine from starting and/or
running if oil falls below the safety threshold.
Protected by a 20 A circuit breaker. Use this duplex to operate 120 Volt AC,
single phase, 60 Hz loads requiring up to 20 Amps 0r 2400 Watts of power.
It has the protection function of electricity leakage (GFCI)
Protected by a 25 A circuit breaker. This receptacle powers 120 Volt AC, 60
Hz, single phase loads requiring up to 25 Amps or 3000 watts of power.
Index style voltage meter, when running the generator unit, it shows
the current voltage; when turn off the generator unit, the reading
returns to"0".
Protects the generator against electrical overload.
Consult an electrician for local grounding regulations.
Web Site: easterntools.com
(4) (5) (6)
EXPLAIN
(7)