Publicidad
Idiomas disponibles
Idiomas disponibles
4.4.1 Manual sychronisation (transmitter call)
T2
T1
After the watch has picked up the time signal (after approx. 3 minutes) the
minute hand and the hour disc will automatically display the correct time.
The LC display changes back to the previous display. You can abort manual
synchronisation prematurely as soon as the minute hand has reached the
12.00 o'clock position. To do this, simply press one of the five buttons. The
minute hand will then return to the original time.
If manual synchronisation was successful, the reception indicator reverts
back to "0". If the transmitter call was not successful, the reception indicator
does not change and the minute hand reverts to the time it displayed prior
to the transmitter call.
54
All manuals and user guides at all-guides.com
Your Junghans Worldtimer Chronoscope
can also be synchronised manually, via
the so-called transmitter call.
To do this, press the T2 "SET" button for
> 3 seconds in the reception indicator
mode.
The minute hand begins to move and
stops at the 12.00 o'clock position.
During this reception phase the LC
display is switched off (no display).
Please keep the watch still during recep-
tion or put it down.
4.4.2 RC on/off
T2
In the "RC/OF" mode your radio-controlled watch continues to function as a
precise quartz watch. The last two digits of the year are displayed in place of
the calendar week.
When returning to a region with time signal transmission, reception must
be switched back on (RC/ON) so that synchronisation can be performed either
automatically or manually.
"RC/OF" is shown by "_ _ _" in place of a transmitter code.
You can switch reception off in the
reception indicator mode. This may
prove useful during longer stays abro-
ad outside the range of transmitters to
T3
save battery power. To do this, press
buttons T2 "SET" and T3"+" simultane-
ously for > 3 seconds.
Using buttons T3"+" and T5"–" you can
T5
now select between
"
" and "
" respectively.
55
Publicidad
Capítulos
