Alarm - Junghaus J615.96 Manual Del Usuario

4.7 Alarm

T1
62
All manuals and user guides at all-guides.com
Press the T1 "MODE" button repeatedly
until you reach the ALARM "A" mode.
Simultaneous pressing of the T3 "+"
and T5 "–" buttons for > 3 seconds will
give you a choice of 3 different alarm
repeat functions:
a.) "SET AL --" for a single alarm
(alarm is deactivated after
alarm signal stops).
b.) "SET AL 24" for a repeated
T3
daily alarm (alarm remains
activated after alarm signal
stops).
T5
c.) " " for weekday
alarm (alarm remains activ -
ated from Mo-Fri and is de -
activated from Sat-Sun).
Selection is via the buttons T3 "+" and T5 "–" respectively. Using the T2 "SET"
button, the alarm repeat is confirmed.
T2
The alarm time is set using buttons T3
"+" and T5 "–". Brief pressing changes
the time in one minute steps.
Keeping the button pressed longer, the
T3
alarm time moves to fast mode.
Setting of the alarm time activates the
alarm automatically.
The alarm is activated and deactivated
T5
by using the T2 "SET" button. If the
alarm is activated, a bell appears in the
LC display for all MODES. On reaching
the alarm time, an acoustic signal is
sounded for approx. 10 seconds.
63