REVOBLOCK motorised joint
use and maintenance manual
- Follow recommended intervals or those indicated in the use and maintenance manual for carrying out
controls and recurring inspections.
- At the end of maintenance or repairs, it is necessary to make sure that:
1. Work has been fully completed.
2. The machine is functioning perfectly.
3. Safety systems are active.
- Handle disposal of normal wear and auxiliary materials along with any pieces replaced according to
current regulations for safeguarding the environment.
3.2 - INTENDED USE
The machine must not be used for purposes other than those that it was designed for.
If there are any defects, especially those that compromise safety, the operator must inform his supervisor.
If any defects that are detected compromise a safe use of the machine, it must be stopped.
Any maintenance interventions must be carried out according to current accident prevention standards and
safety conditions contained in this manual.
Before carrying out repairs or other interventions on the machine, always communicate specific intentions
to other operators involved in the operation and place a sign on the machine under maintenance in a position
that is well visible for all operators.
Any other use, unless specifically authorised, is forbidden.
In particular it is forbidden:
- for untrained personnel to carry out any process procedure, as for any person under the influence of alcohol
and medications.
- running/supervising and maintenance for unauthorised personnel;
- removing or modifying protection devices installed on the machine;
- starting the machine if it was not installed properly, in particular if the clamping bolts have not been
installed;
- loosening the locking ring nuts of the worm screw.
Before any modification, it is mandatory to contact the manager of the BATTIONI PAGANI S.P.A.
technical office.
3.3 - SAFETY DEVICES
The following safety devices are installed on the machine:
- fixed worm screw protection on all of its sides.
REVOBLOCK 7 Ø 200 - Ø 250
REVOBLOCK 10 Ø 200
pag. 42
WORM SCREW FIXED PROTECTION
REVOBLOCK 7 Ø 200 MY 21
REVOBLOCK 10 Ø 200 MY 21
REVOBLOCK 14 Ø 200 - Ø 250