In digital television is used the Transport Stream, in which two types of packets
can be distinguished clearly: those that content packetized video or audio, and those
that content the information necessary to be able to accede to video or audio. These
last ones form the specific information of the programs (PSI, Program Specific
Information), and allow to construct a series of tables that store the organization of the
programs or services that there are in the Multiplex, as well as data about their
conditional accesses (in case they are encrypted).
The DVB standard adds to tables MPEG-2 a few tables more than they offer very
useful complementary information in the case of digital television, between which they
emphasize the service table (Service Description Table), the network table (Network
Information Table), and the bouquet table (Bouquet Association Table).
In the list of services they will appear all the present services in the service table
according to the ETS 300 468 standard. Therefore will appear the decodable services
by any digital television decoding system that satisfies the MPEG-2 / DVB standard, as
well as the data services, the utility reserved services by the operator, and even the
discontinuous transmission services that, however, have been specified in the service
table outside of its hours of transmission.
The specification for the Service Information in DVB systems, recommends that
the table that contents the description of services (SDT, Service Description Table),
was faithful to services that at every moment are contained in the Multiplex. Even so, it
is responsibility of the operator that content of this one and other tables is updated or
that only correct information is contained.
When the BER measurement indicates acceptable reception quality (always to
the left of the QEF level), and the identification information confirms that you have found
the required channel, you will be able to ask for decoding some video and/or audio
service.
Figure 22.- Tuning a digital channel with acceptable BER level.
For decoding any service there are two possible procedures:
1)
Go to the service list, option service list from functions menu in digital mode.
Page 54
USER'S MANUAL. PROLINK-3/3C
CSI:
0
25
50
75
BER AFTER VITERBI
- 7
- 6
- 5
QEF
- 3
CHAN : 68
W.P. :
0 IN 00:00:22
NETWORK:
TV Net
26 %
100
- 2
- 1
Premium
06/2005