Ci-23 Set-Up - Promax PROLINK-3 Premium Manual De Instrucciones

4.14.2 CI-23 set-up

This point explains how to modify the CI-23 printer set-up.
[1] POWER LED [2] SET-UP [3] FEED [4] ON [5] OFF
To initiate the set-up mode push the [2] SET-UP and the [4] ON keys. The [1]
POWER ON LED will flash until set-up mode is turned off. The current parameter status
will be printed. The status of the DATA BITS parameter will be printed in order to modify
it if necessary.
To select the status of the resting parameters (PARITY, BAUD-RATE,
COUNTRY, PRINT MODE, AUTO-OFF, EMULATION and DTR) push the [3] FEED
key. These parameters are selected in a sequential way. To modify the status of any
parameter push sequentially the [2] SET-UP key. Example:
SERIAL BAUD RATE: 300, 600, 1200, 2400, 4800, 9600, 19200, 300...
When all the necessary changes have been made, push the [2] SET-UP and [3]
FEED keys to update the configuration of the printer. If no key is pressed for 15
seconds the set-up mode will be terminated without changing the original parameters.
Page 92
Figure 49.- CI-23 keyboard
PROGRAMME-MODE
Present setting are:-
Data bits :-
Parity :-
Baud-rate :-
Country :-
Print mode :-
Auto-off :-
Emulation :- Standard
DTR :-
Figure 50.- CI-23 setup
USER'S MANUAL. PROLINK-3/3C
8
Nome
19200
U.K.
Text
5 Min.
Normal
Premium
06/2005