Recommended Use; Technical Specifications - Fox F28-191A Manual De Instrucciones

EN
EXTENSION CABLES
Only use three conductors extension cables, with a plug with two plugs and a earthing contact and sockets with
two holes and a earth corresponding to the plug of the tool. When using an electric tool at a remarkable distance
from the power supply, use an extension cable with sufficient dimensions to transport the current which the tool
needs. If the extension cable has not the sufficient dimensions a voltage drop can occur, thus causing an
overheating and a voltage loss. You can only use extension cables which are in compliance with CE standards.
Extension cable length: up to 15 m
Cable dimensions: 3 x 2,5 mm²
Before using any kind of extension cable, check that it has not bare wires and that the insulation is not cut or worn.
Repair and change immediately it if it is damaged or worn.
WARNING:
Extension cables must be arranged away from the working area in order that they do not get in touch with the
workpieces, the tool or other parts of the machine, thus creating possible risks.
WARNING:
KEEP THE TOOLS AND THE EQUIPMENT AT A SAFE DISTANCE FROM CHILDREN

RECOMMENDED USE

This bandsaw has been manufactured for cross cutting and trimming of plastics, wood.
Maximum cutting height is 170 mm with the workbench at 0°.
The workbench can be inclined up to 45° to angle cut.

TECHNICAL SPECIFICATIONS

Engine power: ............................................................................................................................................ 750 W
Voltage and frequency: ..................................................................................................................230 V – 50 Hz
Blade rotational speed: ................................................................................................................ 360/720 m/min
Blade's length: ..................................................................................................................................... 2240 mm
Blade's width: ....................................................................................................................................... 6 - 15 mm
Gooseneck: ............................................................................................................................................. 330 mm
Maximum cutting height: ......................................................................................................................... 170 mm
Workbench inclination capacity: .................................................................................................... from 0° to 45°
Workbench dimensions: ..................................................................................................................500x400 mm
Weight: ........................................................................................................................................................ 58 kg
25