Transport And Storage - Fulcrum SPEED 40T Manual Del Usuario

®
• Do not expose the carbon wheels to high temperatures. Do not store bike parts in vehicles parked in the sun, and do not store near radiators or other
heat sources. Do not store carbon fiber products in direct sunlight.
Use only mild cleaning substances such as water and neutral soap, or specific products for cleaning bicycles, to clean the wheels. Dry
using a soft cloth and never use abrasive or metallic sponges.
CAUTION (ONLY FOR SPEED 40T / SPEED 55T)!
of the labels when cleaning the rim: these types of labels are extremely resistant to atmospheric agents but they are susceptible to
solvents and they cannot be replaced.
NOTE
Never spray your bicycle with water under pressure.
Pressurized water, even from the nozzle of a small garden hose, can pass seals and enter into your Fulcrum components, damaging them beyond repair.
Wash your bicycle and Fulcrum components by wiping them down with water and neutral soap.
WARNING!
Salt water environments (as found on winter roads and near the seaside) can cause galvanic corrosion on most bike parts. Carefully rinse, clean, dry
and re-lubricate all exposed parts to avoid damage, malfunctions and accidents.
When transporting the wheel separately from the bike or if the wheel will not be used for a long period of time, store it in the wheelbag to protect it
against impacts and dirt.
12
6.1 - CLEANING THE WHEELS
Never use solvents, particularly alcohol, acetone, petrol and diesel, on the surface

6.2 - TRANSPORT AND STORAGE

Rev01_10_2016