Varian Turbo-V70 Manual De Instrucciones página 64

When the configuration parameters have to be changed,
send a Request string with H characters of the following
type:
"H" + .... data .... + CRC
The following parameters can be changed:
Bytes
1 Speed adjust value (in KRPM)
2 Speed threshold
3-6 Run up time in seconds
(long coded in 4 bytes)
7 Deat time
(0 = NO 1 = YES)
8 Soft Start mode
(0 = NO I=YES)
9 Water cooling
(0 = NO I=YES)
10 CRC
When the Request is "I" (Status readings), the Answer
will contain a string of 2 characters with the following
parameters:
Bytes
0000 = STOP
0001 = WAITING INTERLOCK
LSB X 0010 = STARTING
X 0011 = NORMAL OPERATION
X 0100 = HIGH LOAD
0101 = " "
X
0110 = FAILURE
0111 = APPROACHING LOW SPEED
1
X
R2 status (0 = OFF 1 = ON)
X
R1 status (0 = OFF 1 = ON)
X
...
MSB X
...
2 CRC
When the Request is "J" (Numerical readings), the
Answer will contain a string of 5 characters with the
following parameters:
Bytes
1 Power (0-255 scaled)
2 Voltage (0-255 scaled)
3 Rotational speed KRPM
4 Pump temperature °C
(0-70 temperature reading, 255 = fail)
5 CRC
Meaning
Meaning
" "
Meaning
When the Request is "K" (Counters readings), the
Answer will contain a string of 11 characters with the
following parameters:
Bytes
1-4 Cycle time
5-8 Pump life
9-10 Cycle number
11 CRC
When the Request is "L" (software version), the Answer
will contain a string of 12 characters with the following
parameters:
Bytes
1-3 Software version
4-7 CRC 16 EPROM
8-11 CRC 16 parameters
12 CRC
On request a sample program in QBasic language is
available by Varian.
When the configuration parameters have to be changed,
send a Request string with the letter "S" and a series of
characters as shown below:
"S" + .... DATA .... + CRC
The CRC is calculated on the string consisting of
S + DATA.
This field is structured as follows:
Bytes
0 ÷ 4
1
2 CRC
The values assumed by byte "1" have the following
meaning:
•
0 = 600 baud
•
1 = 1200 baud
•
2 = 2400 baud
•
3 = 4800 baud
•
4 = 9600 baud
58
TECHNICAL INFORMATION
Meaning
Meaning
Meaning
87-900-883-01 (C)