Brewing Coffee Later (Delay Brew) - Mr Coffee JPX Serie Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
NOTE: The brew basket lid is hot after brewing. Always allow
the coffeemaker to cool down before cleaning.
5. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™ TIMER
feature. To turn the coffeemaker off, press the Brew
Now/Off button all lights will turn off.
6. Make sure the decanter is empty before starting to brew
coffee.
7. Be sure to turn your coffeemaker off when no longer
using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature lets you know how long
your coffee has been waiting for you. At the start of the brew
cycle, the FRESH BREW™ TIMER feature will automatically be
activated.
Press the FRESH BREW™ TIMER button once
(Figure 8) and the clock time will change to
show the amount of time that has passed since
brewing completed. Push again to display
current time.
NOTE: The Brew Now button must be lit for
the Fresh Brew
feature to operate. The time
TM
and delay brew time cannot be set when the
fresh brew time is displayed.
16
BREWING COFFEE LATER
1. You must first set the time for when you
would like the coffeemaker to begin
brewing your coffee as described in
Setting the Clock and the Delay Brew
Timer section.
2. Prepare your coffeemaker as described in
Adding Water and Ground Coffee section.
3. To activate DELAY BREW and program your
coffeemaker to brew coffee at a later
time, press the Delay Brew button once (Figure 9). The
yellow DELAY BREW light will turn on. The coffeemaker
is now set to automatically brew coffee at the pre-set
later time. You can select a stronger strength if you desire
by pressing the Strong Brew button. Otherwise, it will
default to regular strength.
4. At the pre-set time, the Brew Now/Off light will pulse
and the DELAY BREW yellow light will turn off, indicating
the brewing has started in the selected Strong Brew. The
FRESH BREW™ TIMER feature will start.
5. The coffeemaker warmer plate will keep your coffee hot
for 2 hours and then automatically turn off.
As a safety feature, your coffeemaker will NOT start
Figure 8
again automatically the next day. If you want your
coffee to brew at the same time the following day,
simply add a new filter, coffee and water and set
DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the Delay Brew button once.
The light will turn off (Figure 9).
Figure 9
17

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido