Clock Function; Message Display - Clarion ADZ625 Manual De Instrucciones

Operation Common to Each Mode
5. Press the [ ] button or the [
move the cursor.
6. Press the [DISP] button to select a character.
Each time you press the [DISP] button, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Capital letters...
7. Turn the [VOLUME] knob either clockwise or
counterclockwise to select the desired
character. Pressing the [
the cursor to the next character; pressing the
[ ] button moves the cursor to the previous
character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold the [
onds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1. Play a CD or a CD in a CD changer, or tune a
radio station or TV station that you want to
clear the title for.
2. Press the [DISP] button and display the sub-
title.
3. Press the [T] button. "TITL" appears in the dis-
play and the display switches to the title input
display.
4. Press the [BND] button.
5. Press and hold the [
onds or longer to clear the title and cancel
the title input mode.

Message display

When the unit is powered on or off, a message is
displayed. The user can turn this message dis-
play on or off.
∗ The factory default setting is "ON".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ ] button or the [
select "MESSAGE".
3. Turn the [VOLUME] knob clockwise to set the
message display to "ON", or turn the [VOL-
UME] knob counterclockwise to set the mes-
sage display to "OFF".
4. Press the [T] button to return to the previous
mode.
] button to
] button moves
] button for 2 sec-
] button for 2 sec-
] button to

Clock function

G Time matching
Regarding the "CLOCK INDICATION"...
The unit indicates the clock when the car engine
is running (when ACC is ON).
The clock is of 12-hour indication.
1. Press the [T] button continuously (for about 1
second). "ANA_SENS" is indicated.
2. Press the [ ] button or the [
and select "CLOCK_ _E"
3. Press the [ ] button to indicate the clock.
The clock indicates "AM 12:00" and turns to
the "time setting" mode.
4. Press the [ ] button or the [
and select "HOUR" or "MINUTE" may adjust
items which are flashing.
5. Press the [ ] button or the [
and match the time.
6. Press the [ ] button.
7. Press the [T] button.
The unit returns to the original indication.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings in the car.
∗ This function is not compatible with all cellular tele-
phones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
Adjusting the way of title scrolling
There are 3 ways for scrolling a title in the dis-
play. You can select the way you prefer.
∗ The factory default setting is "AUTO".
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [ ] button or the [
select "SCROLL".
3. Turn the [VOLUME] knob to change the
display. Each time the [VOLUME] knob is
turned either clockwise or counterclockwise,
the display changes between the 2 display
methods available.
4. Press the [T] button to return to the previous
mode.
] button
] button
] button
] button to
21
ADZ625