ADJUSTING THE IDLE
Adjust the carburettor with warm engine and with
the throttle control in closed position. Proceed as
follows:
- turn the idle speed adjustment screw (1) on the
throttle body, located on the right-hand side of
the vehicle, until the idle speed of 1650 RPM is
reached (turn clockwise to increase the speed
and anticlockwise to reduce the speed).
1
EN - 28
To do this, you need to reach the adjuster screw
from airbox front end, using the supplied 8-10
wrench, and work lengthwise with respect to the
motorcycle.