Zoeller 1450-0009 Manual Del Usuario página 7

Black poly pipe
2a. Apply thread tape and thread a 1-1/4 in.
male barbed adaptor (sold separately) into
the top of the pump and tighten. If using
1 in. black poly pipe, install a 1-1/4 in. x 1
in. reducer bushing (sold separately) as
shown. (Fig. 2a)
2b. Clamp pipe onto barbed end of male
adaptor with two hose clamps (sold
separately). (Fig. 2b)
3. Firmly clamp the torque arrestor to the pipe
approximately 2 to 4 ft. above the pump,
using the two clamps provided with the
torque arrestor. (Fig. 3)
2a
2b
3
Torque
Arrestor
7
1-1/4 in.
male
barbed
adapter
1-1/4 in x
1 in.
reducer
bushing
IL1171
IL1172
Approx. 4 ft.