Dyna-Flo DGPH301BL Manual Del Propieratio página 11

ASSEMBLY INSTRUCTIONS
9. Assemble the protective guard (E).
Hang the hooks of the protective guard
(E) onto the holes in upper supports (D).
Secure the protective guards (E) with fixing
brackets (HH) with four 3/16" screws (DD).
Hardware Used
3/16" Screw
DD
Fixing
HH
Bracket
Phillips
JJ
screwdriver
10. Attach the three side panels (G) to the
heater using eighteen 3/16" screws (DD).
Note: Do not cover the front side where the
control knob is located.
Hardware Used
3/16" Screw
DD
Phillips
JJ
screwdriver
9
E
x 4
x 4
10
x 18
DD
11
D
DD
HH
G