Dyna-Flo DGPH301BL Manual Del Propieratio página 13

ASSEMBLY INSTRUCTIONS
13. Connect regulator and hose assembly (RR) to propane
cylinder (not included). The propane gas and cylinder
are sold separately.
CONNECTING GAS CYLINDER
Use only 20-pound cylinders (approximately 18 ¼
inches high and 12 ¼ inches in diameter) equipped
with a cylinder connection device compatible with the
connection for outdoor cooking appliances. The gas
cylinder should not be dropped or handled roughly!
Minimum Gas Supply Pressure : 25 psi / 175 kPa
Maximum Gas Supply Pressure Bottle pressure
Outlet prssure setting of regulator is 11.0 in. W.C / 2.74
kPa -LPG.
Storage of an appliance indoors is permissible only
if the cylinder is disconnected and removed from the
appliance. A cylinder must be stored outoors in a well-
ventilated area out of the reach of children.
A disconnected cylinder must have dust caps tightly
installed and must not be stored in a building, garage or
any other enclosed area.
The minimum hourly of 17000Btu/H / 4.98 KW is required
input rating for a heater for automatic operation at ratings
less than full input rating.
The pressure regulator and hose assembly supplied
with the appliance must be used. The installation must
conform with local codes, or in the absence of local
codes, with national fuel gas code, ANS Z223.1/NFPA54,
natural gas and propane Installation Code, CSA B149.1,
or propane storage and handling code, B149.2.
13
13
RR