Dyna-Flo DGPH301BL Manual Del Propieratio página 8

ASSEMBLY INSTRUCTIONS
3. Insert the pins of the bottom plate (M) into
the holes of lower supports (J). Press to
secure the pins. Using four M5 x 12 screws
(GG), secure the lower supports (J) and
bottom plate (M). Make sure the control
panel (on part I) is facing the direction
opposite the wheel assembly (L). Insert the
pins of the control box assembly (I) to the
holes of lower support (J). Press to secure
the pins. Use four 3/16" screws (DD) to
secure the lower support (J) and the control
box assembly (I).
Hardware Used
Screw M5 x 12
GG
DD
3/16" Screw
Phillips
JJ
screwdriver
4. Assemble the block belt (K).
Fix the block belt (K) to the 2 pcs of lower
support (J) behind the control panel, using
two M5 x 12 screws (GG).
Hardware Used
Screw M5 x 12
GG
Phillips
JJ
screwdriver
3
I
J
DD
x 4
x 4
GG
4
x 2
J
K
GG
8
L
M