Dyna-Flo DGPH301BL Manual Del Propieratio página 12

ASSEMBLY INSTRUCTIONS
11. Install the knob (KK) and chain and long
stem lighter assembly (MM) using one M4 x
10 screw (LL) as illustrated in figure 11.
Take the hook at the other end of the chain
and long stem lighter assembly (MM)
and attach it to the hole in the control box
assembly (I) as illustrated in figure 11A.
Slide the hooks attached to the bottom of
the front panel (H) into the holes on the
bottom plate (M) as illustrated in figure 11B.
Hardware Used
Knob
KK
Screw M4 x 10
LL
Chain and
MM
Long Stem
Lighter Assembly
Phillips
JJ
screwdriver
12. To secure the unit, please use four nails
M8 x 100 (not included) to nail the unit to
the ground.
11
LL
KK
x 1
MM
x 1
H
x 1
12
12
I
M
11A
11B