Dyna-Flo DGPH301BL Manual Del Propieratio página 7

ASSEMBLY INSTRUCTIONS
1. Assemble the wheel assembly (L) to the
bottom plate (M). Fix the wheel assembly (L)
to the bottom plate using four M6 x 12 bolts
(EE) and four flange nuts M6 (FF).
Hardware Used
Bolt M6 x 12
EE
FF
M6 Flange nut
Wrench
II
Phillips
JJ
Screwdriver
2. Unscrew ignitor knob (marked with lighting
bolt) on the control box assembly (I). Insert
AA battery (NN) with positive end (+) outward
and replace ignitor knob.
Hardware Used
AA battery
NN
The electronic ignition requires 1 "AA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargable (Nickel-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.
1
x 4
EE
x 4
L
FF
2
NN
x 1
WARNING
7
M
I