Sanus VML5 Manual Del Usario página 18

STEP 2D
Min. 16 in.
(406 mm)
CAUTION
: Avoid potential personal
injuries and property damage!
●
Studs must be at least 2 x4 / 25 ga.
●
If back side of wall is unfinished, drywall
must be installed to a minimum of one stud
left and right of the stud(s) being used to
install the mount.
●
Drywall must be a minimum of 1/2 in. (13 mm)
thick on each side of the studs, and a
minimum clearance of 1 7/8 in. (48 mm)
behind the wall is required.
●
This product must be centered on the studs.
● Stud type and structural strength
must conform to the North American
Specification for the Design of Cold-Formed
Steel Structural Members
[362 S 125 18, C-Shape, S - Stud Section].
●
Drywall must be secured to studs with
screws 12 in. (304.8 mm) on center.
18
Steel Stud Option (Double and Single Stud Install)
Steel Stud Anchor Kit [NOT INCLUDED]
Contact Customer Service at
1-800-359-5520 to have this
additional hardware shipped
directly to you.
Anchor
S1 x4
1
13
1. Locate a nail/screw in the stud using the Sanus magnetic stud finder
2. Find the edges of the stud using the probe of the stud finder
3. Mark the center of the stud with a pencil.
1/4-20 Snap Toggle BB
2
13
Screw
1/4-20 x 1.75
S2 x4
3
13
provided.
13
.
Washer
.734 x .312 x .065 in.
S3 x4