Sanus VML5 Manual Del Usario página 7

1.3 Attach TV Brackets
01
Center the TV brackets over your TV hole pattern as shown. Be sure to use the same holes and that the brackets are level.
NOTE: Loosen the adjustment screws
Install using the spacer, TV screw and washer combination you selected for your TV.
IMPORTANT
: Tighten the adjustment screws
CAUTION:
Avoid potential personal injuries and property damage! DO NOT use a power screwdriver for this step.
Tighten screws only until TV Bracket is secured in place. DO NOT overtighten M4 screws
01
A
Loosen
Tighten
A 01
on TV brackets to extend the mounting holes over your TV hole pattern.
A
on TV brackets
01
01
when finished.
02
.
a
Spacer, screw and washer
02 03 04 05 06
09
07 08
b
Spacer, screw and washer
02 03 04 05 06
09
07 08
Standard
configurations are
shown. For special
applications, or if
you are uncertain
about your hardware
selection, contact
Customer Service at
1-800-359-5520.
IMPORTANT:
For ease of access,
straps should
be level with the
bottom of the TV.
7