REFRIGERATOR
SHELVES
The shelves in your refrigerator
are adjustable
to meet
your individual
storage needs. Your model may have glass
or wire shelves.
Adjusting
the shelves to fit different
heights of items will
make flnding
the exact item you want easier. Doing so will
also reduce the amount of time the refrigerator
door is
open which will save energy.
IMPORTANT:
Do not clean glass shelves with warm water
while they are cold. Shelves may break if exposed to
sudden temperature
changes or impact.
CAUTION:
Glass shelves are heavy. Use special care
when removing them.
Adjusting Shelves (Cantilever)
Remove shelves from the shipping
position and replace
shelves in the position you want.
To remove a shelf--Tilt
up the front of the shelf in the
direction
of C) and lift it in the direction
of (_.
Putt
the shelf out.
HUMiDiTY
CONTROLLED CRISPER
The crispers provide fresher tasting fruit and vegetables
by
letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the moisture-
sealed crispers by adjusting the control to any setting
between VEGETABLE and FRUIT.
VEGETABLE keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
FRUIT lets moist air out of the crisper for best storage
of fruit.
To relnstall a shelf--Tilt
the front of the shetf up and
guide the shelf hooks into the slots at a desired
height.
Then, lower the front of the shelf so that the hooks
drop into the slots.
Removing and installlng the humidity
controlled crisper
1. To remove,
putt the drawer
out to futt extension.
2. Lift the front
of the crisper
up, then
putt it straight
out.
3. To install,
slightly
flit up the front,
insert the drawer
into
the frame
and
push it back
into place.
J
Removing the glass
1. Lift up the glass under the crisper cover.
2. Putt the glass up and out.
NOTE: Pantry drawer
not shown for clarity.
_1_CAUTION:
Make sure that shelves are level from one
side to the other. Failure to do so may result in the shelf
falling or spilling food.
25