Luminance Brands Kathy Ireland Home LK53 Serie El Manual Del Propietario página 13

5.3
Route the Fan Speed Control Chain through the Offset
Hole of the Bowl Cap (Figure 18) .
Route the Light Fixture Assembly Chain through the
Center Hole of the Bowl Cap (Figure 18) .
Place the Bowl Cap onto the Threaded Stud and
against the Glass Shade .
NOTE: The bowl cap comes with two options: two
holes and three holes for pull chain options.
Install the Bowl Cap and tighten the Finial Nut onto the
Light Fixture Assembly Threaded Stud (Figure 18) .
NOTE: It is advisable to periodically check the
tightness of the finial nut.
NOTE: It is critical that the fan chain(s) are aligned
with hole(s) in the shade and bowl cap for smooth
operation of the fan switch(es).
5.4
Attach the Chain, Pendant, and Coupling Assembly
(supplied) to the Light Fixture Assembly Control Chain
by connecting the Coupling onto the Light Fixture
Assembly Control Chain (Figure 19) .
Attach the Chain, Pendant, and Coupling Assembly
(supplied) to the Fan Switch Assembly Control Chain
by connecting the Coupling onto the Fan Switch
Assembly Control Chain (Figure 19) .
5. Final Installation (continued)
THREADED STUD
BOWL CAP
FINIAL NUT
Figure 18
LIGHT FIXTURE
ASSEMBLY CHAIN
CHAIN, PENDANT &
COUPLING ASSEMBLY
Figure 19
13
FAN SPEED
CHAIN
LIGHT FIXTURE
ASSEMBLY CHAIN
FAN SPEED
CHAIN
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: PH334