Luminance Brands Kathy Ireland Home LK53 Serie El Manual Del Propietario página 6

3. Installation on Luminance Brands Fans Having a
Modular Switch Housing with Center Screw
3.6
Insert the Black and White Wires from the Light Fixture
Assembly through the Switch Housing Center Hole
(Figure 5) .
Thread the Switch Housing onto the Light Fixture
Assembly (Figure 5) .
NOTE: To prevent the wires from twisting, hold the
wires taut while installing the switch housing.
Tighten the Light Fixture Assembly until it fits securely
against the Switch Housing and the Fan Speed Control
Chain does not align with the Light Fixture Assembly
Sockets (Figure 5) .
3.7
Insert the Black and White Wires through the
Lockwasher and Hex Nut (supplied) (Figure 6) .
Firmly tighten the Hex Nut to secure the Light Fixture
Assembly to the Switch Housing using a wrench .
SWITCH
HOUSING
SWITCH
HOUSING
CENTER HOLE
LIGHT FIXTURE
ASSEMBLY
Figure 5
INSTALL
LOCKWASHER
AND HEX NUT
SWITCH
HOUSING
LIGHT FIXTURE
ASSEMBLY
Figure 6
6
(continued)
LIGHT FIXTURE
ASSEMBLY
BLACK & WHITE
WIRES
LIGHT FIXTURE
ASSEMBLY
BLACK & WHITE
WIRES
U.L. Model No.: PH334