NEFF F 3470 Instrucciones De Montaje E Instalación página 29

Adjacent furniture
Identification plate
Adjacent furniture must be made of non-flammable
materials. The fronts of adjacent furniture must be
heat-resistant up to at least 70 °C.
If the appliance is installed very close to other units,
the minimum clearances specified in the illustration
must be observed.
The technical data for the appliance can be found on
the identification plate on the right external side of the
pan drawer.
Never remove the identification plate from the
appliance.
The setting values are specified on a sticker on the
appliance packaging.
Fill in the
product number (E no.),
production number (FD no.),
factory setting for gas type and pressure and,
if conversions have been made, the new gas type
and pressure in the table below.
E number
After-sales service
Type of gas
Gas pressure
(factory setting)
Type of gas
Gas pressure
(conversion)
FD number
27