NEFF F 3470 Instrucciones De Montaje E Instalación página 37

Replacing the mains cable
L
N
The mains cable is replaced via the terminal strip.
Do this as follows:
• Pull the supply cable out of the socket.
• Open the terminal box.
• Undo screw (A) holding the cable on the terminal
strip.
• Undo the screw contacts and replace the cable
with one of the same length.
The cable must conform to the specifications in
the "Mains cable" section.
• Connect the yellow/green wire to terminal $. This
$
wire must be approximately 20 mm longer than
A
the other wires.
• Connect the blue neutral wire to terminal N.
• Connect the supply cable to terminal L.
35