Troubleshooting Tips - vitapur VWD9506W-POU Manual De Uso Y Cuidado

9. Re-install the dispenser top cover and secure using the two Philips screws.
10. Re-connect the power cord.
Draining the Reservoirs:
IMPORTANT! Unplug the dispenser before performing this procedure. Dispense hot water until temperature drops
to a safe level to avoid the risk of scalding.
1. Turn off the water supply, using manual shut-off valve at the rear of the dispenser.
2. Press both dispensing buttons until water stops flowing.
3. Place a container/bucket beneath the drain valve located at the rear of the dispenser (See Fig. 18).
4. Remove the drain cap and plug from the drain valve and let the remaining water flow into the container/bucket.
Replace the cap and plug.
Going Away on Vacation:
When not using the dispenser for long periods of time or when going on vacation, unplug the dispenser and drain the
reservoirs (see Draining the Reservoirs). Follow Initial Product Cleaning Procedures upon return and startup of the
dispenser.
SPECIFICATIONS:
VWD9506W-POU / VWD9506BLS-POU
Heating Temp (approx.):
Cooling Temp (approx.):
Output per hr:
Internal Tank:
Power Consumption:
Working Water Pressure:
TROUBLE SHOOTING TIPS:
Attention: Do not return this product to the store. For questions on operation, assembly or parts, please contact us at
www.greenwayhp.com or 1-866-253-0447.
PROBLEM
194°F / 90°C
39 - 54°F / 4°C - 12°C
Hot
1.2 gal / 4.6 L
0.2 gal / 0.6 L
1150 W
POSSIBLE CAUSE
Cold
0.5 gal / 2.0 L
0.8 gal / 3.6 L
88 W
Up to 120psi
10
SUGGESTED SOLUTION