Hardware Kit Contents - Invacare Matrx FSSH Manual De Usuario

TRD0238- Fixed Space Saver Hardware Installation, Rev 5.0 (Europe)_Layout 1 13/09/2012 11:07 AM Page 3

2.0 Hardware Kit Contents

/
2.1 Cane Clamp Kit Hardware
(left clamp assembly shown)
Figure 1.0
Figure 1.0 above provides an overview of the Space Saver Cane Clamp Kit for
mounting our MaTRx back cushions onto the back canes of a wheelchair (left clamp
assembly is shown). Each Hardware Kit includes extra mounting hardware (i.e.;
screws/spacers/washers) to allow proper centering of the MaTRx back between the back
canes and mounting plates.
mounting
cane adapters
plate
available for:
depth/recline
7/8" (22mm)
adjust screws
and/or
screw
3/4" (19mm)
plate
backcanes
set
screw
spacer
cane
clamps
3