Latching The Cooling Device Lid; Setting The Temperature - Mobicool MCF32 AC/DC Instrucciones De Uso

MCF32, MCF40, MCF60 AC/DC
➤ Place the cooling device on a firm foundation.
I
NOTE
Place the cooling device as shown (fig. 1, page 2). If you operate
the cooling device in a different position it can be damaged.
➤ Connect the cooling device, see chapter "Connecting the cooling device"
on page 11.
A
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooling device
that are intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button for between one and two seconds.
✓ The "POWER" LED lights up.
✓ The display switches on and shows the current cooling temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooling device starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off auto-
matically if the battery voltage is low. The LED "POWER" flashes
orange.
6.6

Latching the cooling device lid

➤ Lift the latch (fig. 1 1, page 2) and close the lid.
➤ Release the latch.
✓ The latch audibly clicks in place and secures the cooling device lid.
6.7

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "+" and "–" buttons to select the cooling temperature.
EN
Operation
13