Britax MARATHON 70-G3 Guia Del Usuario página 20

Care and Maintenance
Cleaning the Cover
• HAND WASH the cover using cold water and mild soap.
• LINE DRY to prevent the cover from shrinking.
• DO NOT:
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Harness
• SPONGE CLEAN the harness using warm water and mild soap.
• TOWEL DRY
• DO NOT:
* Disassemble the harness
* Bleach
* Machine wash
* Machine dry
* Iron
Cleaning the Shell
• SPONGE CLEAN the shell using warm water and mild soap.
• TOWEL DRY
• DO NOT use abrasive cleaners
Replacing the Cover
Fit the child seat cover around
1
the child seat shell.
Attach the plastic hooks
2
behind the head pad onto the
child seat.
Replace the belly pad and
3
buckle:
a Turn the buckle retainer sideways
and route it through the belly
pad.
b Route the belly pad and buckle
retainer through the buckle slot
in the cover.
* Ensure that the buckle is through
the correct cover slot for the buckle
position.
36
1
2
3a
c Slide the end of the belly pad
under the comfort foam on the
child seat.
d Turn the buckle retainer
sideways and route it through
the front buckle slot and then
into the desired buckle position
in the child seat.
Attach the plastic hooks to
4
the bottom edge of the child
seat.
Slide the head pad cover over
5
the harness height adjuster
and attach the elastic straps to
the rear tabs.
Attach the hook and loop
6
fasteners on the head pad
cover around the harness
straps.
Care and Maintenance
3c
3d
4
5
6
37