Combi Zone Function; Notes Regarding Cookware; Activation; Deactivation - NEFF T T48 Serie Instrucciones De Uso

Combi zone function

Using this function, the two left hotplates of the same size can
be linked together. When doing this, the same heat setting is
set for both hotplates. This is especially suitable for cooking
with oblong cookware.

Notes regarding cookware

To achieve the best results, use suitable, oval cookware in the
area of both hotplates. Position the cookware in the middle of
the hotplates.

Move function

You can use this function to combine the two left hotplates of
the same size and select a different heat setting for each
hotplate. Preset heat settings:
Front hotplate = heat setting
Rear hotplate = heat setting
The heat settings for each hotplate can be changed
independently of each other.
Notes
Only place the cookware on one of the hotplates. The
■
function will not be activated if there is cookware on both
hotplates.
The heat setting lights up less brightly in the display for the
■
hotplate with no cookware; however it is not activated until
the cookware is moved onto and detected by this hotplate.
If the function has already been activated and a second piece
■
of cookware is placed on the free hotplate, the display lights
up less brightly, as before, but the hotplate is not active.

Advice on using cookware

To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
Only use one piece of cookware which only covers one
hotplate.
Š
–
When you are using cookware on just one of the two hotplates,
it can be moved to the second hotplate. In this case, the heat
setting and the selected settings are transferred.

Activation

The hob must be switched on.
Select one of the two hotplates which are included in the
1.
combi zone with the twist knob and set the heat setting.
Touch the þ symbol. The
2.
symbol.
The heat setting appears in one or both of the displays,
depending on the position and size of the cookware.
The function is activated.
Changing the heat setting
Change the heat setting using the twist knob.

Deactivation

Select the hotplate and touch the
seconds.
Moving the cookware from one hotplate to another:
Activation
Select one of the two hotplates which are included in the move
function.
Touch the ý symbol. The
The heat settings appear in the displays for the two hotplates.
The function is activated.
Note: The display for the hotplate on which the cookware is
placed lights up more brightly.
Changing the heat setting
Select one of the two hotplates which are included in the move
function and change the heat setting using the twist knob.
Note: If the function is deactivated and reactivated, the heat
settings return to the preset values.
Deactivation
Touch the ý symbol.
The function is deactivated.
Note: When one of the two hotplates is set to
deactivated within approx. 3 seconds.
û indicators light up with the
symbol twice within 2
þ
û indicator lights up.
‹ , the function is
ÿ
29