Safety Regulations - Stiga 95 Combi EL QF Manual De Uso

Ocultar thumbs Ver también para 95 Combi EL QF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 101

2. SAFETY REGULATIONS

2.1 TRAINING
Before using this machine, read the
instruction manual of the machine on which
this machine is about to be assembled.
This Safety Regulations chapter only
refers to interchangeable equipment. For
Safety Regulations on the front deck ride-
on mowers, please refer to the instruction
manuals they are supplied with.
Become familiar with the controls
and the proper use of the machine. Learn
how to stop the machine quickly. Failure
to follow the warnings and instructions
may result in fire and/or serious injury.
• Never allow children or persons unfamiliar with 
these instructions to use the machine. Local 
regulations may restrict the age of the operator.
• Never use the machine if the user is tired 
or unwell, or has taken medicine, drugs, 
alcohol or any substances which may slow 
his reflexes and compromise his judgement.
• Do not allow children or other 
passengers to ride on the machine.
• Bear in mind that the operator or user is 
responsible for accidents or unexpected 
events occurring to other people or their 
property. It is the user's responsibility to 
assess the potential risk of the area where 
work is to be carried out, and to take all the 
necessary precautions to ensure his own 
safety and that of others, particularly on slopes 
or rough, slippery and unstable ground.
• If the machine is sold or lent to others, 
make sure that the operator reads the user 
instructions contained in this manual.
2.2 PRELIMINARY PROCEDURES
Personal Protective Equipment (PPE)
• Always wear suitable work attire, hard-
wearing safety footwear with non-slip soles 
and long trousers. Do not operate the
machine when barefoot or wearing open 
sandals. Wear hearing protection devices.
• Wear protective gloves whenever 
your hands are at risk.
• Never wear scarves, shirts, necklaces, 
bracelets, clothing with flowing parts, laces 
or ties or any hanging or flapping accessory 
that could catch in the machine or in any 
objects or materials in the work area. 
• Tie your hair back if it is long.
Work area / Machine
• Thoroughly inspect the entire work area and 
remove anything that could be thrown by the 
machine or damage the cutting means/rotating 
units (stones, branches, iron wire, bones, etc.).
2.3 DURING OPERATION
Work Area
• Do not use the machine in environments at risk 
of  explosion, in the presence of flammable 
liquids, gas or powder. Electrical contacts 
and mechanical friction can generate sparks 
that can ignite the powder or vapours. 
• Work only in daylight or with good artificial 
light in good visibility conditions. 
• Keep persons, children and animals away 
from the working area. Get another adult 
to keep the children under supervision.
• Avoid working with wet grass, in the 
rain and when there is a risk of a 
thunderstorm, especially lightening.
• Pay careful attention to uneven ground 
(hills, dips), slopes, hidden hazards and 
obstacles that could limit visibility.
• Be very careful near ravines, ditches 
or embankments. The machine could 
overturn if a wheel slides over the 
edge or if the earth gives way.
• Pay attention on sloping ground which 
requires particular care to prevent overturning 
or loss of control of the machine. The 
main reasons for loss of control are:
– Insufficient wheel grip
– Excessive speed
– Inadequate braking
– Type of machine unsuitable for its task
– Lack of awareness of the effect of 
ground conditions, especially slopes
– Incorrect use as a towing machine
Behaviour
• Always keep hands and feet away 
from the cutting means, when starting 
and when using the machine.
• Attention: the cutting means will continue to 
rotate for a few seconds after disengagement 
or after you have switched off the engine.
• Pay attention to cutting-means 
assemblies with more than one cutting 
means, as a rotating cutting means can 
trigger the rotation of the others.
• Disengage the cutting-means or power 
take-off and move the cutting-means 
assembly to the highest position:
– When moving between work areas
– When driving on grass free surfaces
If something breaks or an accident 
occurs during work, turn off the motor 
EN - 2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

105 combi el qf95cp e qf105c e qf

Tabla de contenido