Maintenance; Removing The Cover - Britax PINNACLE Guia Del Usuario

Britax Child Safety, Inc.

Maintenance

Removing the Cover

WARNING!
Never remove the buckle tongues from the harness�
DO NOT remove the impact absorbing chest pads from
the harness straps�
1� Loosen the harness�
a� Press release lever
b� Pull both harness
straps forward
2� Unbuckle the harness,
then move the harness
adjuster to the highest
position�
3� Detach the hook and loop
fasteners on the head
restraint cover from around
the harness�
4� Unhook the top elastic
bands on each side of the
head restraint�
5� Unhook the bottom elastic
bands on each side of
the head restraint, then
remove the head restraint
cover�
NOTE: Be careful not
to damage the energy-
absorbing foam.
38
FRONTIER/PINNACLE CLICKTIGHT User Guide
6� Unhook the elastic bands,
then remove the side wing
covers from each side of
the child seat shell�
NOTE: Be careful not
to damage the energy-
absorbing foam.
7� Open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
8� Unhook the elastic
band from the hook
on the bottom of the
CLICKTIGHT, then
pull the cover from the
CLICKTIGHT�
9� Unhook the clips at the
back of the seat cover
from the child seat shell,
then pull the seat cover
forward and over the EZ-
Buckle belly pad�
10� Unhook the clips at the
front of the seat cover from
the child seat shell�
11� Remove the elastic band
from the hooks on the
bottom of the child seat,
then pull the seat cover
from the bottom of the
child seat shell�
39