Beurer BF 25 Instrucciones Para El Uso página 15

Pressing any of the buttons will show the results more rapidly.
Up to 5 results are automatically saved in the data memory. Incorrect measurements indicated
5.4 Measured data recall
The weight and the body fat percentage of the last 5 measurements can be recalled on this scale.
– Switch on the scale by briefly stepping on the platform.
– Select the memory position in which your personal parameters are stored by pressing the
age with the up button
– Press the up button
If user settings are changed (e.g. age), the measured data memory is deleted.
Trend display
This scale hase a trend display, in which the value currently measured is compared with the av-
erages of the last 5 measurements.
▲
– Trend display up
– Trend display down
– Trend display up and down
measurements.
Note that a trend is shown only for the body weight and the body fat, body water and muscle
percentages and can be shown only when you have stored at least 5 body fat percentages etc.
Interpretation
The weight values and the body fat, body
water and muscle percentages are inter-
preted with a bar in the evaluation graphic. When the values are low, the bar is shown to the left
(-). When the bar is in the middle area, the values are normal. While in the right-hand area (+) the
values are relatively high.
Weight:
Your weight is compared with the BMI (Body Mass Index). It is calculated using the following for-
Underweight Normal weight
<20 20-25
Note that with very muscular physiques (body builders), the BMI interpretation will show over-
weight. The reason for this is that no account is taken of well above average muscle mass in the
BMI formula.
▲
. Both values appear for 2 seconds in each case.
▲
repeatedly to display the next older data. After a maximum of 5 meas-
: present value is higher than the average of the last 5 measurements.
▼
: present value is lower than the average of the last 5 measurements.
▲ ▼
: present value is the same as the average of the last 5
Overweight
>25
15
-